Skip to content

Using a rollator safely: brakes, seat, kerbs and checks

The steps below are quoted from NHS Lanarkshire: Walking aid, 4 wheel walker (page updated 29 March 2023, checked 16 November 2026). Your own physiotherapist’s advice comes first if it differs.

1. Know your brakes

Rollators have one of two brake types, and you test them differently:

  • Pressure brakes: “test by pushing down”.
  • Lever brakes: “squeeze the handles.”

NHS Lanarkshire’s first step is to lock the aid with the brakes.

2. Sitting on the seat

  • Lock the brakes first.
  • “Sit slowly as aid can move slightly.”
  • “Do not sit down if on a slope or uneven surface.”
  • “When rising from seat push up using the handles.”

3. Turning

“Use handles for support when turning.”

4. Kerbs

  1. “Move the frame close to the edge of the kerb.”
  2. “Roll the frame fully up onto the kerb.”
  3. “Step up onto the kerb with the good leg first followed by the affected leg.”

5. Stairs

“Do not use the frame to go up or downstairs.” If you have stairs at home, ask your physiotherapist how to manage them.

6. Check it regularly

  • “Regularly check your walking frame.”
  • “Check the joints on the frame are not loose.”
  • Check the brakes still hold, using the test for your brake type above.

If something is worn or loose, contact whoever supplied it before you use it again.

Is it set to the right height?

NHS.uk says to make sure a walking frame is “the correct height for you” and to “ask hospital staff or a mobility shop for advice” (NHS.uk). A physiotherapist can set it for you.

Taking a rollator on transport

Related guides