Last updated: · Published by WalkingAids.net · How we review products
Last checked: 18 November 2026. The door width rules quoted here come from the US ADA Standards and England’s Approved Document M, linked below.
To find out whether a walking frame, rollator or wheelchair will fit through a door, measure the door’s clear opening with the door open, then subtract the aid’s overall width from the product listing. This checker does the sum for you, shows how much room is left on each side, and compares your door with the minimum widths in US and English building rules.
Doorway width checker
The checker only does arithmetic on the numbers you enter. It cannot see your hands, the door handle or how you turn. Try the aid in the doorway, or ask the seller for a home trial, before you rely on it.
How to measure a door’s clear opening
The width that matters is the gap you can actually pass through, which is narrower than the door itself. Both rules below measure it the same way.
- Open the door fully, to 90 degrees if it opens that far.
- Measure from the face of the open door to the door stop on the opposite side of the frame. The ADA Standards measure “between the face of the door and the stop, with the door open 90 degrees”.
- England’s Approved Document M says handles, other door furniture and weatherboards “may be ignored” when measuring. In practice, check that a handle does not catch your hand or the frame.
- Measure at the height of the aid’s widest point, and check nothing lower down, such as a raised threshold, narrows the gap.
How to find the width of a walking aid
Use the overall width from the manufacturer’s specification, not the seat width. If the listing gives only one width, ask the seller whether it is measured across the wheels or across the handles. Our specification finder shows the weight, user limit and handle height for products we have checked.
Minimum door widths in building rules
| Rule | Applies to | Minimum clear width |
|---|---|---|
| 2010 ADA Standards, 404.2.3 | Doors in buildings covered by the ADA in the US | 32 inches (815 mm). 36 inches (915 mm) where the opening is more than 24 inches deep |
| 2010 ADA Standards, 403.5.1 | Walking routes such as corridors | 36 inches (915 mm), which can narrow to 32 inches for up to 24 inches of length |
| Approved Document M vol. 1, Table 1.1 | Internal doors in new homes in England (visitable dwellings) | 750 mm with a 900 mm hallway approached head on; 750 mm with 1200 mm, 775 mm with 1050 mm, or 800 mm with 900 mm when you turn into the door |
These rules apply to new buildings and to buildings covered by the ADA. Older homes, bathrooms and toilets are often narrower, so measure your own doors.
The English table pairs a narrower door with a wider hallway because turning into a doorway needs more room than going straight through. If you enter a hallway width, the checker tells you whether your door and hallway together meet one of those pairings.
Other size limits to know
- Buses and trains set their own size limits for wheeled walkers. See rollators on UK public transport and walkers on planes in the US.
- For the right handle height, see our measuring guide.
- For checks before you buy, see walking aid standards and safety checks.
Related guides